Party Party

The DJ dance floor (also known as light dance, LED dance floor, disco dance floor) consists of shiny fiberboard or panels of various colors (tiling). Various lighting modes can be displayed at the bottom, which can be changed in the controller or according to the dancer’s movement (if the tile has a pressure sensor).

The size of the dance floor varies from 12’X 12 ‘to 28’X 28’ or based on your requirements, dance type and room size. The number of panels used on the dance floor depends on the size of the dance floor or the size of the panel itself. For example, a 9’X9 ‘dance floor only needs 9 panels, while a 30’X30’ might require more than 100 panels.

The dance floor installation is usually included in the rental fee, but if you need to install on an irregular or uneven surface, additional installation costs may apply. Or visit this website https://team9.net/dj/best-equipment/headphones/ for help and advice. 

Setting up For A Party

Turntable

The turntable is a rounded lateral stand for rotating the recording board. The main use of the mixer is for the club DJ to manipulate the sound and beat mix (2 tracks, 2 tracks are marked 2 tracks). Make music using DJ technology. At the same time), juggling and scratching.

DJ Mixer

The DJ Mixer is an audio mixer that combines the level and dynamics of an audio signal (playing two separate sources as one and playing it as one). One of DJ’s main equipment, usually used for turntables.

DJ: Headphone

This device is used to listen to the soundtrack when mixing.

Groove Box (Music Workstation)

Groove-box (or Music Workstation) is a sequencer that combines synthesizers for performing sampling, loop-based electronic music production or audio and video integration. The main advantage of using Groove-box is that you don’t have to use a piano/keyboard.

Bit Counter

The beat counter is utilized to estimate the number of sounds for each minute for the track. Beat counter which a mixers use.

Arranging Dj Equipment for A Party